Table of Contents
Advertisement
•
•
•
•
^å~äçÖ=cçêã~í=`çååÉÅíáçå=q~ÄäÉ
Each HD-15 analog connector on the UIC enables you to input a variety of video formats —
including VGA, composite video, S-video and YUV component video.
•
•
Table 3-1. Analog Input Combinations using Breakout Cable
Breakout Cable
Composite
Wire Color
Video
R
G
B
H Sync
V Sync
FSN-1004 • User's Guide • Rev 00
the Input Setup Menu to set up universal input signals. In Chapter 4, refer to the
"Input
Setup" section on page 117 for setup details.
In Chapter 5, refer to the
"Universal Input
by-step setup instructions.
Refer to the
"Analog Format Connection
of analog formats available when using a customer supplied breakout cable.
In Appendix A, refer to the
of available input formats for the FSN-1004.
The two SDI inputs enable you to connect SDI sources.
For RGB with H and V sync, use the HD-15 connector directly.
Using a customer supplied HD-15 to 5 x BNC breakout cable, several input
combinations are possible. Cells with check marks denote the connections
required for the indicated format.
S-Video
YUV
(Y/C)
(YP
(P
(Lum)
(Lum)
(Chroma)
(P
Setup" section on page 172 for step-
Table" section on page 67 for a chart
"Output Format
Tables" section on page 231 for a list
RGB
P
)
Sync on Green
b
r
)
r
)
b
3. Installation
Signal Connections
RGB
RGB
Comp Sync
Separate H V
67
Advertisement
Table of Contents
