Table of Contents
Advertisement
The right side of the Palette provides a matrix of all available test patterns, plus specific
buttons for {Off} and {Raster Box} .
To send a test pattern to an output, touch the desired BNC in the Rear I/O View section,
then touch the desired test pattern in the matrix.
The following 13 Test Patterns are provided in the matrix:
•
•
•
•
•
•
•
•
•
•
•
•
•
The following functions are provided in the matrix:
•
•
The following functions are provided in the Tool Bar :
•
Select All
Outputs
•
All
Off
FSN-1004 • User's Guide • Rev 00
H Ramp
V Ramp
100% Color Bars
75% Color Bars
16 x 16 Grid
32 x 32 Grid
Burst
50% Gray
Gray Steps 1
Gray Steps 2
White
Black
SMPTE Bars
Press {Off} to turn off the test pattern for the selected output.
Press {Raster Box} to enable or disable a raster box for the selected output. The
raster box width is fixed at 1 pixel. Note that the raster box can be enabled even
if the test pattern is off.
Press {Select All Outputs} to highlight all outputs in the Rear I/O View section.
When you select a test pattern in the matrix, that pattern is sent to all outputs.
Press {All Off} to turn off all test patterns and all raster boxes on all outputs
simultaneously.
4. Menu Orientation
System Menu
157
Advertisement
Table of Contents
