Barco FSN-1004 User Manual page 33

4)
5)
6)
7)
FSN-1004 • User's Guide • Rev 00
MVR Panel
Slot 11 is populated with the MVR card panel. See the
on page 45.
Standard Output Card Panels
Slots 12 and 13 are populated with two SOCs (Standard Output Cards). See the
"Standard Output Card" section on page 43.
System Card Panel
Slot 14 is populated with the System card panel. Refer to the
section on page 35 for details.
AC Power
The AC Power section provides two AC power connectors with integral switches.
One connector is provided for each supply, which allows the frame to be powered
from two different circuit breakers in a redundant configuration.
Note The default FSN-1004 configuration has one power supply
installed in the lower slot. The bottom AC connector is used.
Important Unused rear slots must have blank panels installed for
purposes of thermal management and EMI.
2. FSN-1004 Orientation
Hardware Description
"Multiviewer Card" section
"System Card"
33