Table of Contents
Advertisement
pìãã~êó=çÑ=píáääë=`~éíìêÉ=jÉíÜçÇ
Here is a summary of how the buttons in the Capture Mode can be used:
Use the following steps to capture (store) a source image to one of the 100 Flash
memory locations:
1.
2.
3.
4.
5.
6.
For a summary of how stills are recalled, see
on page 104.
píáää=jÉåì=oÉÅ~ää=jçÇÉ
The figure below illustrates a sample Stills Menu in the Recall Mode . The layout is that
same as for the Capture Mode , except for the buttons at the bottom.
Figure 4-35. Stills Menu, Recall Mode (sample)
FSN-1004 • User's Guide • Rev 00
Press the {Menu Mode} toggle button to select the Capture mode.
Click on one of the 100 memory locations that you want to capture an image into.
Press {Assign Capture Source} to display the pop-up.
Select a source from the list of input sources.
Press {Assign} and {Close} in the pop-up. The image will then appear in the
currently displayed array of 25 image sources.
Press {Capture Still} .
4. Menu Orientation
Summary of Stills Recall Method
Stills Menu
" section
103
Advertisement
Table of Contents
