Table of Contents
Advertisement
3)
4)
5)
6)
7)
8)
9)
FSN-1004 • User's Guide • Rev 00
register clears when you begin entering numbers, and digits shift left as you enter
them. You must press {Enter} to complete an entry.
Backspace
Press Backspace {
} during a numeric entry process to clear the register by
one digit with each press.
Numerics
Press the numeric buttons {0 - 9} to enter values. Digits shift left in the Register
as you enter them. Use the {Decimal} button as required for entries that include
decimal values.
+/-
Press {+/-} to invert the numeric entry in the Register (if applicable). For
example, press {+/-} to change +350 to -350 .
Note
The {+/-} button is only applicable when certain Keypad
functions that accept negative values are active.
Close
Press {Close} to clear the Keypad from the Touch Screen , and "un-latch" the
selected value button.
Note
If you press {Close} prior to pressing {Enter} , {Trim +} or
{Trim -} , the Keypad clears, and the previous value is
maintained.
Undo
Prior to pressing {Enter} , press {Undo} at any point during the numeric entry
process to restore the original value, even if {Clear} or {+/-} was pressed.
Note
If {Enter} is pressed, that value becomes the new value to
which the register will return, if {Undo} is pressed.
Clear
Press {Clear} during a numeric entry process to clear the register to 0 (zero).
Trim -
Enter an offset value using the numeric buttons, then press {Trim -} to subtract
from the parameter's current value. Pressing {Enter} is not required, and the
"trim" value remains in the register, enabling you to trim repeatedly by the same
offset. Once the value is trimmed, you can close the Keypad , or perform addition
trims or entries in the normal way.
For example:
To subtract 5 frames from a transition rate, press the Rate button for
the desired M/E, then in the Keypad , press {5 , Trim -} .
To subtract 25 pixels from a mask value, press the desired mask
edge (e.g., {Mask Top} ), then in the Keypad , press {25 , Trim -} .
4. Menu Orientation
Using the Keypad
83
Advertisement
Table of Contents
