Barco FSN-1004 User Manual page 116

4. Menu Orientation
System Menu
•
Set
Subnet
Mask
Figure 4-46. Communications Setup Menu, IP Subnet Mask keypad (sample)
•
Apply
•
Restore
Default
Settings
116
To change the Subnet Mask of a highlighted port, press {Set Subnet Mask} to
display the Subnet Mask Keypad :
Enter the desired subnet mask using the decimal point as the separator between
the four "octets," and press {Enter} .
After setting both the IP address and the Subnet Mask , press {Apply} to
complete the procedure.
To return the highlighted port's IP address and Subnet Mask to their factory
default values, press {Restore Default Settings} .
FSN-1004 • User's Guide • Rev 00