Barco FSN-1004 User Manual page 89

•
•
•
•
•
•
•
FSN-1004 • User's Guide • Rev 00
~
Description — displays a brief description (or name) of the register, as
entered via the {Description} button. Descriptions can only be entered
in View and Store modes.
Note The space above these three columns is reserved for the
large STORE
specific mode of operation. When no label is present, the
menu is in View mode.
The eight right-hand columns (called " Modules ") indicate which modules are
included in each register. These columns correspond to the categories of
modules available on the panel: SYS (System) and Out .
Please note:
~
An " x " in a cell indicates that the module is included in the register. The
" x " does not indicate the status of the Enables within the module.
~
A blank cell indicates that the module is not part of the register.
~
If a column heading is grayed out, that module is not currently available.
In the table, the yellow highlight indicates the selected register. There are two
ways that you can select registers, including clicking (pressing) on it and clicking
the {Memory Register} value button. Refer to the "
on page 95 for details on all selection methods.
Press {Description} to display the keyboard, which enables you to enter a
register description (or name). Refer to the "
page 95 for details.
Press {Store} to switch from the current mode to Store Mode .
Press {Recall} to switch from the current mode to Recall Mode .
Press {Enables} to display the Enables Menu , which allows you to view or
modify the Enables within each module. Refer to the "
Description " section on page 92 for details.
Press {Advanced} to display the Advanced Memory Menu , which allows you to
delete and lock registers. Refer to the "
on page 95 for details.
4. Menu Orientation
and RECALL labels, which confirm each
Selecting Registers
Naming Registers
Enables Menu
Advanced Memory Functions
Memory Menu
" section
" section on
" section
89