Barco FSN-1004 User Manual page 181

p~îáåÖ=íÜÉ=pÉíìé
FSN-1004 system setup: Step 11
This procedure enables you to save all system setup parameters to non-volatile memory.
11

Use the following steps to save all system setup parameters:
1.
2.
3.
_~ÅâáåÖ=ìé=íÜÉ=póëíÉã
FSN-1004 system setup: Step 12
In this procedure, you will back up your system configuration to your PC.
12

Use the following steps to back up your system to a PC:
1.
2.
3.
4.
FSN-1004 • User's Guide • Rev 00

Prerequisite — Ensure that you are familiar with the Save All function. In
Chapter 4, refer to the "
In the Menu Bar , press {System} to access the System Menu .
Press {Save All} to display the confirmation pop-up.
Press {Close} to clear the pop-up.

Prerequisite — Ensure that you are familiar with the Backup and Restore
Menu . In Chapter 4, refer to the "
page 160.
In the Menu Bar , press {System} to access the System Menu .
Press {Backup and Restore} to display the Backup and Restore Menu .
Press {Backup System} and select or create the folder in which to store the
backup data.
Upon completion of the backup, you will be notified that the backup is complete.
Press {Close} to close the notification window.
Save All " section on page 158.
Backup and Restore Menu
5. System Setup
Saving the Setup
" section on
181