Barco FSN-1004 User Manual page 129

•
Pulldown
Comp
Off
•
De-
Interlace
Adaptve
•
Motion
Thres-
hold
fåéìí=páòáåÖ=~åÇ=pÅ~äáåÖ=m~åÉä
The figure below illustrates a sample Input Setup Menu when a analog input is chosen on
FSN-1004 • User's Guide • Rev 00
Press {Pulldown Comp} to toggle the Pulldown Compensation mode on or off.
~
Select On to apply pulldown compensation, in order to process video
derived from film material.
~
Select Off to disable the mode. This is the default mode.
Note This function applies only for standard video (component, s-
video, composite) inputs.
Press {De-Interlace} to display the De-Interlace Pop-up . If the input is
interlaced, this function enables you to set how the system processes the input.
The following options are available:
~
Select Motion Adaptive to use motion adaptive de-interlacing. In this
mode, the {Motion Threshold} button appears. See below for details.
~
Select Field to Frame to use field-to-frame de-interlacing. This mode
avoids motion artifacts by converting individual input fields to progressive
output frames.
Note This function is available for interlaced formats only. The
button does not appear for progressive scan inputs.
If Motion Adaptive de-interlacing is selected, press {Motion Threshold} to
adjust the threshold of the motion adaptive de-interlacer. Because adjustment is
rarely required, it is recommended that you leave the function at its default setting.
Range : 0 to 15
Default : 15
4. Menu Orientation
System Menu
129