Installing radial shaft seals on
11 11
crankshaft
11 11 Installing the crankshaft-end radial shaft
seal
•
Shape the lip of the radial shaft seal carefully by
hand (1).
•
Oil the radial shaft seal at the sealing/contact
surface.
•
Using assembly sleeve, BMW No. 11 5 702,
mount the radial shaft seal with the closed side
toward the clutch onto sleeve,
BMW No. 11 5 703, (2).
•
Remove assembly sleeve (3).
•
Mount sleeve complete with radial shaft seal on
crankshaft (4).
•
Use drift, BMW No. 11 5 701, together with sleeve
(5) to drive the radial shaft seal onto the crankshaft.
•
Remove sleeve (6).
11 11 Installing the clutch-end radial shaft seal
•
Shape the lip of the radial shaft seal carefully by
hand (7).
•
Oil the radial shaft seal at the sealing/contact
surface.
•
Using assembly sleeve, BMW No. 11 5 662,
mount the radial shaft seal with the closed side
toward the clutch onto drift, BMW No. 11 5 661,
with handle,
BMW No. 00 5 500 (8).
•
Remove assembly sleeve (9).
•
Using the drift, drive the radial shaft seal
home (10).
11.51