Table of Contents
Advertisement
OM3006.4 04/98
Electronic Displays and Messages
MESSAGE FOR OPERATION AND MAINTENANCE ("MOM")
"MOM" (Message for Operation and Maintenance) is
the message display screen located in the upper panel
just above the operator's head. It is used to display
messages to the operator and service personnel. The
screen incorporates touch switches on its surface, to
change displays.
Data that "MOM" can display includes:
Truck Condition-
When the key switch is turned to the run position before
cranking, the display will read OK or WAIT. If the WAIT
warning is present, the reason will also displayed.
If the engine is running and the truck is ready to be
moved, the screen will indicated departure is OK or
WAIT. If the WAIT warning is present, the reason will
also be displayed.
Production Data During Operation -
(Information from the Payload Meter)
• The Current Payload
• The Total Payload
• The Total Number Of Cycles
• Fault Information At The Time Of Occurrence
• The Fault Code And Its Description
• The Action Code And Its Description
• Other Function - Clock
NOTE: The operator should follow the recommenda-
tion that is displayed on the "MOM" screen. However,
the operation of the truck is not prohibited. Even if the
screen displays WAIT the truck can still be operated if
an emergency situation exists.
1. Screen i1, Initial Message
After the key switch is turned on, the initial mes-
sage (i1) is displayed for three seconds after a
system message is displayed. The picture num-
ber, i1, the title, and the program version number
are all indicated on this screen. After being dis-
played for three seconds, i1 is changed to the first
initial check, Check 1, screen i2, automatically.
If any of the controllers detect a fault in their
system, the i1 screen is changed to the display of
the warning message i6 automatically after three
seconds.
2. Screen i2, Initial Check 1
This screen is displayed after i1 and before the
engine is started. It is used to inform the operator
whether the conditions are acceptable to start the
engine.
When "MOM" judges that engine start is accept-
able, "ENGINE START OK" is indicated on the
screen.
If "MOM" judges that engine start is not accept-
able, "ENGINE START WAIT" is indicated on the
screen.
Operation - Section 3
Page 3-37
Advertisement
Table of Contents
