Komatsu 530M Operation & Maintenance Manual page 88

OM4006.1 06/98
Lubrication and Service
Prior to each operating shift, a ''walk around'' inspec-
tion should be performed. Check the truck for general
condition. Look for evidence of hydraulic leaks; check
all lights and mirrors for clean and unbroken lenses;
check operator's cab for clean and unbroken glass;
check frame, sheet metal and body for cracks. Notify
the proper maintenance authority if any discrepancies
are found. Give particular attention to the following:
CHECK ALL FLUID LEVELS
a. Engine Oil-
Note: Refer to engine manufacturer service man-
ual for oil recommendations.
b. Radiator -
Check coolant level and fill with proper mixture as
shown in Cooling System Recommendation
Chart.
c. Battery - Check electrolyte level and add water if
necessary.
d. Steering, Brake Oil Tank - Check oil level in tanks,
add if necessary. Lube key ''C''.
Refer to ''Hydraulic Tank Service'', page 4-10.
e. Hoist & Brake Cooling Oil Tank - Use Lube key ''C''.
Refer to ''Hydraulic Tank Service'', page 4-10.
NOTE: Check oil level with truck level, engine
STOPPED, body down, and oil warm. Oil should
be visible in sight glass. - DO NOT OVERFILL.
f. Transmission - Check oil level.
Add oil, if necessary. Lube key ''C''.
Refer to ''Transmission Oil Level Check'', page 4-1.
g. Fuel Tank - Fill as required.
h. Differential - Truck should be on level surface, oil
level should be even with plug hole or at plug hole.
Refill with oil as necessary. Lube key ''B''.
10 HOUR (DAILY) INSPECTION
Truck Serial Number ____________________________
Site Unit Number ______________________________
Date:______________Hour Meter_________________
Serviceperson Name___________________________
COMMENTS
Maintenance - Section 4
Page 4-3
√'d
INITIALS