Table of Contents
Advertisement
Optional Equipment - Section 6
Page 6-24
FINAL GEAR RATIO SELECTION
For an 830E truck, the proper gear ratio has to be
selected.
1. Press and hold the MODE and LIGHT/INC
switches until ''CHEC'' is displayed.
2. Press and hold the TOTAL/SFT and LIGHT/INC
switches until ''S.SEL''
is displayed.
3. Press the CAL/CLR switch repeatedly
until ''A.XX'' is displayed, where
''XX'' is one of the following:
''XX''
Gear Ratio
00
31.875
01
36.400
02
28.125
03
26.625
NOTE: The Payload Meter is originally set to ''00".
4. Press the TOTAL/SFT switch and "XX" will flash.
5. Press theLIGHT/INC switch to select the desired
gear ratio.
6. Press the MODE switch
and "CHEC" will be displayed.
7. Press the MODE switch and the meter will return
to normal operation.
Remarks
Original
High Traction
Standard
High Speed
OM6007 2/99
Payload Meter II
Advertisement
Table of Contents
