Table of Contents
Advertisement
Operation - Section 3
Page 3-42
After the operator has been informed of the fault code,
the action that should be taken is as follows:
1. Stop the truck in a safe location.
2. Apply the parking brake.
3. Confirm the presence of the fault code and the
action code.
4. Follow the instructions of the action code.
5. Notify a qualified technician for repairs.
The possible action codes are as follows:
CODE
DESCRIPTION
01
Go to shop after work.
02
Go to shop right now.
03
Reduce engine/machine speed.
04
Stop safely/shut off engine.
05
Wait with engine low idle.
06
Start engine/keep low idle.
07
Keep body seated.
Electronic Displays and Messages
Cancellation of Action Code
If either of the following requirements is satisfied then
the action code will be canceled.
1. If the fault which caused the action code is no
longer present, then the action code will be can-
celed automatically, and the same, or next priority
action code will be displayed automatically, if
there are any other active faults.
2. If the fault remains, the action code can be can-
celed by a qualified technician who is trained to
monitor the system.
OM3006.4 04/98
Advertisement
Table of Contents
