Table of Contents
Advertisement
OM2006.1 06/98
General Safety
PRECAUTIONS WHEN CARRYING OUT MAINTENANCE AT HIGH TEMPERATURE OR HIGH PRESSURE
•
Immediately after stopping operations, the engine cooling water and oil at all parts
are at high temperature and under high pressure.
In this condition, if the cap is removed, or the oil or water are drained, or the filters
are replaced, it may result in burns or other injury. Wait for the temperature to go
down, then carry out the inspection and maintenance in accordance with the
procedures given in this manual.
ROTATING FAN AND BELT
•
Keep away from rotating parts and be careful not to let anything get caught in them.
•
If your body or tools touch the fan blades or fan belt, they may be cut off or sent flying,
so never touch any rotating parts.
WASTE MATERIALS
•
Never dump waste oil in a sewer system, rivers, etc.
•
Always put oil drained from your machine in containers. Never drain oil directly
on the ground.
•
Obey appropriate laws and regulations when disposing of harmful objects such
as oil, fuel, coolant, solvent, filters, batteries, and others.
Safety - Section 2
Page 2-15
Advertisement
Table of Contents
