Komatsu 530M Operation & Maintenance Manual page 124

OM6007 2/99
Payload Meter II
TYPES OF DATA STORED
Cycle Data
One cycle is considered to be from the point where a load is dumped to the point where the next load is dumped.
Data between these two points is recorded in memory. Examples of the data are shown below. The maximum
number of cycles that can be stored in memory is 2900 cycles.
ITEM
Engine Operation Number
Month
Day
Time Hour
Time Minute
Payload
Travel Time When Empty
Travel Distance When Empty
Maximum Travel Speed When Empty
Average Travel Speed When Empty
Time Stopped When Empty
Time Stopped During Loading
Travel Time When Loaded
Travel Distance When Loaded
Maximum Travel Speed When Loaded
Average Travel Speed When Loaded
Time Stopped When Loaded
Dumping Time
Speed Limit
Warnings For Each Cycle
UNIT RANGE
Number 1 - 65535
Month
Day
Hour 24 Hour Clock
Minute
Metric tons
0 - 6553.5
Short tons
Minute 0 - 6553.5
Miles/Km 0 - 25.5
Mph/Kmh
Mph/Kmh
Minute 0 - 6553.5
Minute 0 - 6553.5
Minute 0 - 6553.5
Miles/Km 0 - 25.5
Mph/Kmh
Mph/Kmh
Minute 0 - 6553.5
Minute 0 - 6553.5
Mph/Kmh
The fault codes that occur during each cycle
Optional Equipment - Section 6
REMARKS
Advances by one each time the
engine is started.
1 - 12
1 - 31
These values are stored when the
load is dumped.
1 - 59
0 - 99
0 - 99
0 - 99
0 - 99
0 - 99
Page 6-9