Table of Contents
Advertisement
OM4005 10/96
Lubrication and Service
100 HOUR LUBRICATION AND MAINTENANCE CHECKS
NOTE: 10 Hour service should be included with the
following:
CAB
a. Steering Column Linkage -- Use hand gun and
lubricate with grease. Lube Key ''E''. (2 pts.)
b. Cab Door Hinges -- Oil hinges as necessary. Lube
Key ''AA'' (SAE 10W). Check door & windows for
proper operation, correct as required.
c. Cab Air Filter -- Clean or replace.
d. Cab Mounts -- Check rubber cab mounts, replace
as required.
e. Outside Mirrors And Lights -- Check for damage
and operation, repair as required.
f. Instrument Panel -- Check instruments for proper
operation. Verify operation of all lights and warn-
ing devices. Check alternator charging rate. Cor-
rect as required.
FRONT WHEEL --
Check front wheel bearing oil level. Lube Key ''C''.
NOTE: To check oil in front wheel hub, rotate
wheel hub until one fill/drain hole is horizontal,
and the other is "up", add lube oil as required.
THROTTLE CABLE LINKAGE --
Oil linkage with SAE 10W oil (Lube Key ''AA'').
BRAKES --
Check hydraulic brake control valve, brake cali-
pers, brake pads, hoses and tubes for leaks or
wear, repair as required.
U-JOINTS/DRIVE SHAFTS --
Use hand gun and lubricate at grease fittings on
the cross and bearing assemblies and splines.
Lube Key ''E'' (6 pts.).
FUEL TANK --
Drain water and sediment from fuel tank.
HYDRAULIC TANK BREATHER --
Remove spin-on breathers and check breathers
for cleanliness. Replace as necessary.
Truck Serial Number ____________________________
Site Unit Number _____________________________
Date:______________Hour Meter_________________
Serviceperson Name___________________________
COMMENTS
Maintenance - Section 4
Page 4-5
√
'
INITIALS
d
Advertisement
Table of Contents
