Komatsu 530M Operation & Maintenance Manual page 16

OM1006.2
Standard Charts and Tables
Nomenclature Code
LT-1A
LT-1B
LT-2
Adhesives
LT-2A
LT-2B
LT-2C
LT-3 Main bond
Hardening agent
LG-1
LG-3
Liquid Gasket
LG-4
LG-5
Antifriction
LM-P
compound
Grease G2-LI
Vaseline --
(1) Used for threaded areas (for example, plug, nipple, elbow etc.) which are removable and a pressure of 20 kg/cm
(285 psi) or less.
(2) Used for threaded areas (for example, stud, etc.) which are not removable and a pressure of 20 kg/cm
or less.
NOTE:
These sealants and adhesives are manufactured and sold by Three Bond U.S.A., Inc.
For information, call or write to:
SEALANTS AND ADHESIVES
Three Bond
TB1521
1000B - 1000W
TB1374
TB2411
TB2403
TB2430 or TB2440
TB2001
TB2105
TB1108B
TB1107
TB1104
TB1110
--
--
--
Three Bond U.S.A., Inc.
6184 Schumacher Park Drive
West Chester, OH 45069
Telephone: (513) 779-7300
Fax: (513) 779-7375
Used to apply rubber pads, rubber gaskets and cork plugs.
Used to apply resin, rubber, metallic and non-metallic
parts when a fast, strong seal is needed.
Preventing bolts, nuts and plugs from loosening and leaking oil.
Preventing bolts, nuts and plugs from loosening and leaking oil. (1)
Preventing bolts, nuts and plugs from loosening and leaking oil. (2)
Preventing bolts, nuts and plugs from loosening and leaking oil. (2)
Provides an airtight, electrically insulating seal. Used for aluminum surfaces.
Used with gaskets and packings to increase sealing effect.
Heat-resistant gasket for precombustion chambers and exhaust piping.
Used by itself on mounting surfaces on the final drive and transmission
cases. Thickness after tightening: 0.07-0.08 mm (0.0027-0.0032 in)
Used by itself to seal grease fittings, tapered screw fittings and tapered
screw fittings in hydraulic circuits of less than 50 mm (2 in ) in diameter.
Applied to bearings and taper shafts to facilitate press-fitting
and to prevent sticking, burning or rusting.
Applied to bearings, sliding parts and oil seals for lubrication,
rust prevention and facilitation of assembling work.
Used for protecting battery electrode terminals from corrosion.
Three Bond
TB1374
TB1521
TB1104
TB1108B
Introduction - Section 1
Applications
PART NUMBERS
Komatsu
09940-00030
790-129-9030
790-129-9020
790-129-9010
Page 1-13
2
2
(285 psi)