Komatsu 530M Operation & Maintenance Manual page 94

OM4006.1 06/98
Lubrication and Service
Maintenance for every 250, 500 and 1000 hours should
also be carried out at this time.
1. STEERING, BRAKE & COOLING OIL TANK
Drain oil from tank and refill tank to specified level,
capacity 576 liters (152 U.S. gal.).
Refer to ''Lubrication Chart'' for type of oil to use.
Lube key ''C''.
Refer to ''Hydraulic Tank Service'', page 4-10.
2. FINAL DRIVE CASE
Position machine so that casting line is horizontal
and drain plug is at the bottom. Drain oil and
reinstall plug, remove fill plug at castline and fill to
specified level. This operation is performed on the
right and left hand final drives.
Capacity is 240 liters (63.5 U.S. gal.) each side.
Refer to ''Lubrication Chart'' for type of oil to use.
Lube key ''B''.
3. DIFFERENTIAL CASE
Drain oil from differential and refill to the specified
level: capacity = 300 liters (79 U.S. gal.).
Refer to ''Lubrication Chart'' for type of oil to use.
Lube key ''B''.
4. ENGINE VIBRATION DAMPER
Inspect damper for cracks or separation on rubber
surfaces. If any defects are noted, replace with new
vibration damper.
Refer to shop manual, Section ''C'', Engine and
Cooling System. Notify the proper maintenance
personnel, if any discrepancies are found.
EVERY 2000 HOUR SERVICE
Truck Serial Number ____________________________
Site Unit Number ______________________________
Date:______________Hour Meter_________________
Serviceperson Name___________________________
COMMENTS
Maintenance - Section 4
Page 4-9
√'d
INITIALS