Table of Contents
Advertisement
Maintenance - Section 4
Page 4-4
AIR CLEANERS
Check service indicator. If indicator shows red, clean
filter. Push the indicator reset button to return the red
piston to original position.
DRIVE BELTS
a. Check alternator and fan belts for proper tension
and condition.
b. Inspect for alignment.
ENGINE AND TURBOCHARGERS
Inspect for leaks, vibrations or odd noises.
WHEELS AND TIRES
After each wheel mounting operation, recheck
wheel mounting capscrew tightness after 4 -- 5
hours of operation. Check again at the end of the
shift and then periodically until all capscrews hold
at the prescribed 225 ± 25 kg.m (1628 ± 180 ft.lbs.)
torque. This requirement is prescribed for both
front and rear wheels.
TIRES
a. Inspect for proper inflation and wear.
b. Inspect for debris embedded in cuts or tread.
10 HOUR (DAILY) INSPECTION
(continued)
Lubrication and Service
√'d
COMMENTS
OM4006.1 06/98
INITIALS
Advertisement
Table of Contents
