Table of Contents
Advertisement
Maintenance - Section 4
Page 4-12
HYDRAULIC TANK BREATHER
Cleaning
1. Shut down the engine and open hydraulic tank filler
caps slowly to relieve any internal pressure.
2. Clean dirt accumulation from area of breather (3,
Figure 4-2).
3. Remove the breather from the tank.
4. Remove snap ring (1, Figure 4-4), cover (2) and
filter element (3).
5. Clean breather element in solvent and blow dry.
Clean remaining parts in solvent and dry thor-
oughly.
6. Install element, cover and snap ring.
7. Install breather element on hydraulic tank.
FIGURE 4-4. HYDRAULIC TANK BREATHER
1. Snap Ring
2. Cover
OM4006.1 06/98
Lubrication and Service
3. Element
Advertisement
Table of Contents
