MAGSTIM RAPID2 Operating Manual page 40

Magstim Rapid
2 3576-23-09
C21 Coil Disconnected/ Coil Under Temperature.
C22
Brown Out Detected.
C23
No serial Cmmmmications.
C24
Bad Serial command of received data checksum (outside TRIGG-ATE).
C25 EMC Detected (Coil adapter only).
C26 Invalid Coil Power Identification (Coil adapter only).
C27 Hardware Stop activated.
C28 Watchdog Timeout.
C29 Temperature Interlock 3 activation.
C30 Coil stop line fault.
Errm· codes produced by base system.
Error Codes Description
E61 Power fail
E62 Stack underflow
E63 Stack overflow
E64
RTS overnm
E65 WD Timeout
E66 Unexpected reset
E67 Bad checksum
E68 SYS debug error
E70
Coil under temperature
E71 Coil ma.x difference
E72 Stack over temperature
E73 Stack under temperature
E75 HVCAP over temperature
E77 Charge threshold failure
E78
VREF check failure
The l\'IAGSTIM Company LTD
37
November 2009