System Status Codes - MAGSTIM RAPID2 Operating Manual

Magstim Rapid 2
3576-23-09
SECTION: 7. SYSTEM STATUS CODES
BASE Controller Error Codes produced by the User Interface.
Error Codes Description
U24
UI Power Supply Failure
U25
Stack underflow
U26
Stack overflow
U27
RTS oveinm
U28
Watchdog Timeout
U29
ROM Checksum Incorrect
U34 No serial co1mmmications
U35 Loss of communication
U36
Bad NVRAM Checksum
U37 Battery Voltage Low
U38
Bad External Flash Checksum Detected.
Enor codes produced by Coil.
Error Codes Description
COl ROM Checksum Incorrect.
CO2 EEPROM Checksum Inconect.
C03 Invalid coil Category.
C04
Invalid Power Identification .
C05
Temperature sensor circuit failure.
C06 Bad Serial command or received data checksum.
C07 Internal Software Error.
cos
Invalid Coil Temperature ID.
C09
Invalid temperature algorithm coefficient.
ClO Coil controller malfunction.
The l\'IAGSTIM Company LTD 36 November 2009