MAGSTIM RAPID2 Operating Manual page 21

Magstim Rapid
2
3576-23-09
AMPLITUDE CURSORS PANEL
Press the Amplitude Cursors button (green when selected) to access the Amplitude Cursm·s
panel.
Status
Trnce 1
Trace 2
Select the Status window to turn the Amplitude Cursors on and off. The default
setting is OFF.
This window allows the Amplitude Cursor on Trace l to be moved, for example
to mark peaks.
This window allmvs the Amplitude Cursor on Trace 2 to be moved, for example
to mark peaks.
Each time a new set ofMEP waveforms are displayed and the Amplitude Cursors are active, the
cursors will automatically move to the peak values for each trace. In Repetitive Mode or Session
Mode, the peak achieved in Single Pulse Mode will remain marked by the Amplitude Cursor on the
trace.
The MAGSTIM Company LTD
18
November 2009