MAGSTIM RAPID2 Operating Manual page 30

Magstim Rapid
2
3576-23-09
5.2 USER CONFIGURATION
Use1· Configuration
Volume
Contrast
Coil Switch Option
Date
Time
Modify
Language Setup
Battery Voltage
Back
This screen allows the user to set system parameters. which are stored in
an area of the UI' s memory which is battery powered.
This allows the user to set the screen selection beep volume by selecting
the windmv and using the Rotary Control Knob.
This allows the user to adjust the TFT contrast option from l -
10,
in steps
of
1.
This gives the user the choice to use the coil safety s,vitch or not each time
the system is armed. \Vhen ON the System will prompt the user on a Run
Screen to state if they wish to use the coil safety switch.
Note: If the coil switch option is set to ON, each time the system is armed
the user will have a YES/NO option on the screen to ignore the switches
before the system can fire. When the 'YES' button is selected a small
yellow button will appear in the top right hand corner of the system status
panel to indicate 'ignore' option is active.
It is important that those in the vicinity of the system are made aware that
the system is in this mode of operation, to ensure that inadvertent
triggering does not occur.
Use 'Modify' to alter the 'Date Settings'
Use 'Modify' to alter the 'Date Settings'
To change the date and the time settings, select the Modify button.
Individual windmvs appear to allow date, month, year, hour, minute and
second to be altered. Press to select a window and alter the information
using the Rotary Control Knob. To save press the Set Time button.
This option allows the user to change the language of the displays. German,
English and French are available. English is the Default language.
This window displays the UI's backup battery voltage.
Selection of this option takes you back to Systems Options Menu.
Options Menu Selection of this option will return the user to the Options Menu Screen.
The MAGSTIM Company LTD 27 November 2009