Table of Contents
Advertisement
Magstim Rapid
2
3576-23-09
4.10 SESSION MODE
SESSION DETAILS
Session Details shows a pictorial representation of 3 lines of the session
running currently.
Channels 1, 2 and Both
Selecting Channel 1, Channel 2 and Both determines whether both traces
are shown sinrnltaneously, or individually.
Trnce Window·
The Trace Window will be updated when a stimulation occurs. The
maximum update
rate for the trace windmv is, 4 times a second, depending
on the amount of information to be displayed.
Resume
If the amplitude cursors are active then the last position set for each cursor
in Single Pulse Mode will be displayed. The cursor position will remain
fixed until Single Pulse Mode is re-entered.
In order to save the trace, it is necessary to go back to Single Pulse Mode
and save the data as before. The information ,vill remain on each trace
window until a new trace is generated, when the new trace will overwrite the
previous trace.
This Option is available if the system is armed and the previous session was
not completed. This option ,vill return the session to the point at which it was
stopped. This will always begin at the start of the next session line regardless
ofv,rhen the last session line ,vas stopped.
In order to save the traces, it is necessary to go back to Single Pulse Mode and save the data as before.
The infonnation will remain on each trace v,rindow until a new trace is generated. Then it v,rill be
overwritten by a new one.
Setup
Single Pulse
Options Menu
Selection of this option will return the user to the Repetitive Setup screen.
Selecting this option will return the user to the Single Pulse Mode screen.
Selection of this option will return the user to the Options Menu screen.
The MAGSTIM Company LTD
25
November 2009
Advertisement
Table of Contents
