Erps; Figure 4.96 L2 Switching > Loopback Detection > Port Settings; Figure 4.97 L2 Switching > Erps > Erps Settings - Advantech EKI-7720 Series User Manual

To access this page, click L2 Switching > Loopback Detection > Port Settings.
Figure 4.96 L2 Switching > Loopback Detection > Port Settings
The following table describes the items in the previous figure.
Item
Port Select
Enabled
Apply
The ensuing table for Loopback Detection Port Information settings are informa-
tional only: Port, Enable State and Loop Status.
4.5.14

ERPS

4.5.14.1 ERPS Settings
To access this page, click L2 Switching > ERPS > ERPS Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for Information settings are informational only: ERPS State.
EKI-7720 Series User Manual
Description
Enter the port to define the local loopback detection setting.
Select Enabled or Disabled to setup the Loopback Detection func-
tion.
Click Apply to save the values and update the screen.
Figure 4.97 L2 Switching > ERPS > ERPS Settings
Description
Click Enabled or Disabled to enable ERPS settings.
Click Apply to save the values and update the screen.
75