Mellanox Technologies SwitchX-2 MSX6005F-1BFS Hardware User Manual page 29

SwitchX®-2 12 Port InfiniBand Switch System Hardware User Manual
3. Over-temperature
This equipment should not be operated in an area with an ambient temperature
exceeding the maximum recommended: 45°C (113°F). Moreover, to guarantee
proper air flow, allow at least 8cm (3 inches) of clearance around the ventilation
openings.
4. Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
5. Double Pole/Neutral Fusing
This system has double pole/neutral fusing. Remove all power cords before opening
the cover of this product or touching any internal parts.
6. Multiple Power Inlets
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the
platform.
7. During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
8. Copper Cable Connecting/Disconnecting
Copper cables are heavy and not flexible, as such they should be carefully attached to
or detached from the connectors. Refer to the cable manufacturer for special warn-
ings/instructions.
9. Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with
equipment starting from the bottom to the top.
switch
Mellanox Technologies
Rev 1.0
29