Figure 3: Status Leds; Table 3: Switch Status Led Configurations - Mellanox Technologies MIS5022Q-1BRR User Manual

Rev 1.2
4.1.1.2 Status LED
The Status indicator is located on the left side of the front panel (connector side) of the unit. The
following status conditions are possible:
Table 3 - Switch Status LED Configurations
Off
Solid Green
Red
16
Mellanox Technologies

Figure 3: Status LEDs

If the Status LED shows red after 30 seconds unplug the switch and call your Mellanox
representative for assistance.
If the Fan LED shows red unplug the switch and call your Mellanox representative for
assistance.
If the switch shuts down due to over temperature, unplug the switch, wait 5 minutes
and replug in the switch. For more information See "Troubleshooting" on page 33.
LED Description
No power to the switch
Switch is running
All OK
There is a problem with power output from
the power supply, or there is a thermal shut
down.
Hardware Basic Operation and Installation