Mellanox Technologies SwitchX-2 MSX6005F-1BFS Hardware User Manual page 52

Rev 1.0
2. Compare the results of this command with the latest version for your switch posted on the
www.mellanox.com
System page.
3. If the current version is not the latest version, follow the directions in the MFT User manual
to burn the new firmware inband.
4. I2C Connector
The I2C connection provides access to Flash and EEPROMs. This connection is for FAE use
only.
5.5.2 How to Get Mellanox Firmware Tools (MFT)
Mellanox Firmware Tools (MFT) and documentation are available for download via 
http://www.mellanox.com
The MFT kit includes:
• mlxburn
• flint
• spark
• debug utilities
See "Related Documentation" on page 8.
52 Mellanox Technologies
> Support > Firmware Downloads > SwitchX®/SwitchX®-2 Switch
The externally managed switches are Plug and Play and all firmware updates should
be done in-band.
This interface is for Debug and Troubleshooting only. This interface is for FAEs
and advanced users only.
> Downloads > Firmware & Documents.
Switch Management