Ipv6 - Tenda MX15 Pro User Manual

If you cannot access the internet, try the following solutions:
−
Ensure that the original router is connected to the internet successfully.
−
Ensure that your WiFi-enabled clients are connected to the correct Wi-Fi network of the Mesh
device.
−
If the computer connected to the Mesh device cannot access the internet, ensure that the
computer is configured to obtain an IP address and DNS server automatically.
2.8.4

IPv6

This function is only available in the router mode.
The Mesh device can access the IPv6 network of ISPs through three connection types. Choose the
connection type by referring to the following chart.
Scenario
−
The ISP does not provide any PPPoEv6 user name and password and
information about the IPv6 address.
−
You have a router that can access the IPv6 network.
IPv6 service is included in the PPPoE user name and password.
The ISP provides you with a set of information including IPv6 address, subnet mask,
default gateway and DNS server.
Before configuring the IPv6 function, ensure that you are within the coverage of the IPv6 network and
already subscribe to the IPv6 internet service. Contact your ISP for any doubt about it.
DHCPv6
DHCPv6 enables the Mesh device to obtain an IPv6 address from the DHCPv6 server to access the
internet. It is applicable in the following scenarios:
− The ISP does not provide any PPPoEv6 user name and password and information
about the IPv6 address.
− You have a router that can access the IPv6 network.
65
Document version: V1.0
Connection Type
DHCPv6
PPPoEv6
Static IPv6 address