Connect Your Primary Node To The Internet - Tenda MX15 Pro User Manual

Connect your primary node without a modem
To directly connect your primary node without a modem:
Ensure that the network connection status of your Ethernet device is normal.
Step 1
Use an Ethernet cable to connect the WAN port of the primary node to the LAN port of
Step 2
the Ethernet device.
The WAN port of the primary node may vary with models.
−
For MX3/EX3, connect to the WAN/LAN port.
−
For MX6/EX6/MX12/EX12, connect to the WAN/LAN1 port.
−
For MX15 Pro/EX15 Pro/MX21 Pro/EX21 Pro, connect to any of 1, 2 and 3 ports.
Power on the primary node, and wait until the LED indicator lights solid green.
Step 3
---End
2.1.2

Connect your primary node to the internet

After connecting your primary node, you can complete quick setup for internet access by following
the instructions on the web UI wizard. This wizard only occurs upon your first setup.
To connect your primary node to the internet through the quick setup wizard:
Use an Ethernet cable to connect your computer to the LAN port of the primary node.
Step 1
The LAN port of the primary node may vary with models.
−
For MX3/EX3, connect to the LAN port.
−
For MX6/EX6/MX12/EX12, connect to the LAN2 or LAN3/IPTV port.
−
For MX15 Pro/EX15 Pro/MX21 Pro/EX21 Pro, connect to any of 1, 2 and 3 ports.
Start a browser on the computer and enter tendawifi.com in the address bar to access
Step 2
the web UI.
11
Document version: V1.0