Tenda MX15 Pro User Manual page 135

Target the firmware file downloaded previously (extension: bin), and click Open.
Step 6
Click Upgrade.
Step 7
Wait until the upgrade completes. Then, access the Firmware Upgrade page again and
check whether the upgrade is successful based on Current Firmware Version
---End
For better performance of the new firmware, you are recommended to reset the Mesh device to
factory settings and re-configure the Mesh device after the upgrade completes.
Backup & restore
In this module, you can back up the current configuration of the Mesh device to your computer.
You are recommended to back up the configuration after the settings of the Mesh device are
significantly changed, or the Mesh device works in a good condition.
If you forget your Wi-Fi password or fail to fix network connection problems with other solutions,
you can reset the Mesh device to factory settings on this page.
After you restore the Mesh device to factory settings or upgrade it, you can use this function to
restore the configuration that has been backed up.
To access the configuration page,
System Settings > Backup & Restore.
log in to the web UI of the Mesh device, and choose More >
125
Document version: V1.0
.