View Ipv6 Status - Tenda XPON ONT HG1 User Manual

Table of Contents

Advertisement

4.2

View IPv6 status

On this page, you can view the IPv6 connection status of the ONT.
To access the page,
log in to the web UI
Parameter description
Parameter
IPv6 Address
LAN
IPv6 Link-Local
Configuration
Address
Prefix Delegation
Prefix
Interface
VLAN ID
Connection Type
Protocol
WAN
Configuration
IP Address
Status
of the ONT and navigate to Status > Status > IPv6.
Description
Specifies the LAN IPv6 address of the ONT.
Specifies the IPv6 link-local address of the ONT.
A link-local address is an IPv6 unicast address that is automatically
configured on any interface and is valid only for communications
within the network segment.
Specifies the IPv6 prefix of the LAN port of ONT.
Specifies the name of the interface/WAN when IPv6 is enabled.
Specifies the VLAN ID of the WAN connection.
Specifies the WAN connection type.
Specifies the channel mode used by the WAN port.
Specifies the IP address that the ONT obtains after you set up a WAN
connection successfully.
Specifies the connection status of the WAN connection.
up: The WAN connection is successful.
down: The WAN connection failed and is currently unavailable.
21
Document version: V1.0

Advertisement

Table of Contents
loading

Table of Contents