Tenda MX15 Pro User Manual page 118

Remote web management
Overview
Generally, the web UI of the Mesh device can only be accessed on clients that are connected to the
Mesh device by a LAN port or wirelessly. When you encounter a network fault, you can ask for
remote technical assistance after enabling the remote web management function, which improves
efficiency and reduces costs and efforts.
To access the configuration page,
Advanced > Remote Web Management.
By default, this function is disabled. When this function is enabled, the page is shown as below.
The following table describes the information displayed on this page.
Parameter description
Parameter
Remote Web
Management
Remote IP Address
log in to the web UI
Description
Used to enable or disable the remote web management function of the Mesh
device.
Specifies the IP address of the host which can access the web UI of the Mesh device
remotely.
−
Any IP Address: Indicates that hosts with any IP address from the internet
can access the web UI of the Mesh device. It is not recommended for
security.
−
Specified IP Address: Only the host with the specified IP address can
access the web UI of the Mesh device remotely. If the host is under a
LAN, ensure that the IP address is the IP address of the gateway of the
host (a public IP address).
of the Mesh device, and choose More >
108
Document version: V1.0