Dhcp Server - Tenda MX15 Pro User Manual

3.6.12

DHCP server

The Dynamic Host Configuration Protocol (DHCP) is an automatic configuration protocol used on IP
networks. If you enable the built-in DHCP server on this device, the TCP/IP protocol settings will be
automatically configured for all PCs in the LAN, including IP address, subnet mask, gateway, and
DNS.
To set up a DHCP server:
Run the Tenda WiFi App, and choose Settings > Advanced > DHCP Server.
Step 1
Enable DHCP Server.
Step 2
Specify the Start IP Address, End IP Address, and LAN IP address.
Step 3
Enable DNS as required and set Primary DNS and Secondary DNS (Optional).
Step 4
Tap Save.
Step 5
---End
Now a DHCP server is established.
192
Document version: V1.0