Tenda MX15 Pro User Manual page 17

Jack/Port/Button Description
POWER Power jack.
MX15 Pro&EX15 Pro&MX21 Pro&EX21 Pro
Jack/Port/Button Description
Reset button.
When the device completes startup, hold down this button using a needle-like item
RESET
(such as a pin) for about 8 seconds, and then release it when the LED indicator blinks
red fast. If the LED indicator blinks green slowly, the device is reset successfully.
Mesh button.
MESH
Do not hold down the MESH button for 8 seconds unless necessary.
RESET
MESH
3
2
1
POWER
−
As a networking button: Press this button on this device for about 1 to 3
seconds. The LED indicator blinks green fast, which indicates the device is
searching for another device to form a network. Within 2 minutes, press the
MESH button of another device for 1 to 3 seconds to negotiate with this
device.
−
As a de-networking button: Press this button for about 8 seconds and release
it when the LED indicator blinks red fast. The node is restored to factory
settings, and also removed from the network and no longer automatically
joins in again.
7
Document version: V1.0