Enable Remote Web Management.
Step 3
Select Specified IP Address for Remote IP Address.
Step 4
Enter the IP address that is allowed to access the web UI remotely for Specified IP
Step 5
Address, which is 210.76.200.101 in this example.
Click Save.
Step 6
The following message is displayed, indicating that the settings are saved successfully.
---End
When the configuration is complete, the Tenda technical support can access and manage the web
UI of the Mesh device by visiting "http://202.105.106.55:8888" on the computer.
Static routing
Overview
Routing is the act of choosing an optimal path to transfer data from a source address to a
destination address. A static route is a special route that is manually configured and has the
advantages of simplicity, efficiency, and reliability. Proper static routing can reduce routing
problems and overload of routing data flow, and improve the forwarding speed of data packets.
A static route is set by specifying the destination network, subnet mask, default gateway, and
interface. The destination network and subnet mask are used to determine a destination network
or host. After the static route is established, all data whose destination address is the destination
network of the static route are directly forwarded to the gateway address through the static route
interface.
110
Document version: V1.0