Table of Contents
Advertisement
3.7.2
Auto system maintenance
This function reboots the Mesh devices regularly to keep them in the best working condition. You
can set up the auto system maintenance function here:
Configuration procedure:
Run the Tenda WiFi App, and choose Settings > Auto System Maintenance.
Step 1
Enable Auto System Maintenance.
Step 2
Select a reboot time for Reboot at.
Step 3
You are recommended to set a time when your network is idle. 02:00 is used as an
example.
Select the days on which the rule takes effect.
Step 4
Enable or disable the Delay Reboot function as required.
Step 5
Tap Save.
Step 6
---End
Now the devices will automatically reboot at the specified time.
If the devices are exchanging data and the traffic
is greater than 3 KB/s, the devices will not reboot
at the specified time even when the Delay
Reboot function is enabled. Within 2 hours after
the specified reboot time, the devices keep
detecting the traffic, and reboot once when the
traffic is lower than 3 KB/s for 0.5h. Otherwise,
the devices will reboot the next day at the
specified reboot time.
207
Document version: V1.0
Hide quick links:
Advertisement
Table of Contents
