The following table describes the parameters displayed on this page.
Parameter description
Parameter
Description
UPnP
Used to enable or disable the UPnP function.
Remote Host
Specifies the address of remote host to receive and send responses.
External Port
Specifies the port set on the Mesh device to map to the outer.
Internal Host
Specifies the address of inner host to receive and send responses.
Internal Port
Specifies the host port which needs to be mapped.
Protocol
Specifies the mapping protocol.
Port mapping
Overview
With this function, you can map an external port to an internal port, so that applications using the
internal port (such as a web server) are accessible from the internet.
To access the configuration page,
Advanced > Port Mapping.
The following table describes the parameters displayed on this page.
Parameter description
Parameter
Description
Internal IP Address
Specifies the IP address of the intranet server.
Internal Port
Specifies the service port of the intranet server.
External Port
Specifies the external port for the internal port to map with.
log in to the web UI
of the Mesh device, and choose More >
118
Document version: V1.0