Wps - Tenda MX15 Pro User Manual

3.6.17

WPS

The WPS function enables WiFi-enabled devices, such as smartphones, to connect to Wi-Fi
networks of the Mesh device without entering the password.
−
This function only applies to WPS-enabled Wi-Fi devices. It is enabled by default and cannot be
disabled.
−
Wi-Fi networks encrypted with WPA3 cannot be connected through WPS.
−
The WPS negotiation times out in 120 seconds. The WPS button is disabled during WPS
negotiation.
To connect a device to the Wi-Fi network using the WPS function:
Run the Tenda WiFi App, and choose Settings > Advanced > WPS.
Step 1
Tap the WPS button on the row where the target node resides.
Step 2
Countdown starts when the WPS function is enabled.
Enable the WPS function on the WPS-supported device within 2 minutes to start WPS
Step 3
negotiation.
---End
Now the WPS-supported device is connected to the internet.
201
Document version: V1.0