Speed
100 Mbps full duplex
100 Mbps half
duplex
10 Mbps full duplex
10 Mbps half duplex
2.8.10
Advanced
App remote management
The Mesh device can be managed remotely using the Tenda WiFi App. The app remote
management function is enabled by default. You can disable this function as required.
To access the configuration page,
Advanced > APP Remote Management.
The following table describes the parameters displayed on this page.
Parameter description
Parameter
APP Remote
Management
Application
Indicates that the WAN port is working at the speed of 100 Mbps, and the port can
receive and send data packets at the same time.
Indicates that the WAN port is working at the speed of 100 Mbps, but the port can
only receive or send data packets alternately.
Indicates that the WAN port is working at the speed of 10 Mbps, and the port can
receive and send data packets at the same time.
Indicates that the WAN port is working at the speed of 10 Mbps, but the port can only
receive or send data packets alternately.
log in to the web UI
Description
Used to enable or disable the app remote management function. It is enabled by
default.
of the Mesh device, and choose More >
99
Document version: V1.0