Enter ping 240c::6666 and press Enter.
Step 3
---End
As shown in the following figure, if the number of packets received is not 0, the Mesh device
accesses the IPv6 network successfully.
If the IPv6 network fails, try the following solutions:
−
Ensure that clients connected to the Mesh device obtain their IPv6 address through
DHCPv6.
Consult your ISP for help.
−
PPPoEv6
If your ISP provides you with the PPPoE user name and password with IPv6 service, you can choose
PPPoEv6 to access the internet.
Smart home gateway
Configuration procedure:
Log in to the web
Step 1
Choose More > IPv6.
Step 2
Enable the IPv6 function.
Step 3
Set Internet Connection Type to PPPoEv6.
Step 4
Set PPPoE Username and PPPoE Password provided by your ISP, and click Save.
Step 5
UI.
67
Document version: V1.0