Tenda MX15 Pro User Manual page 191

AP mode
When you have a smart home gateway that only provides wired internet access, you can set the
Mesh device to work in AP mode to provide wireless coverage.
You can switch the working mode to AP mode here.
When the Mesh device is set to AP mode:
−
Every physical port can be used as a LAN port.
−
Functions, such as bandwidth control and port mapping will be unavailable. Refer to the web UI
for available functions.
To switch to the AP mode:
Run the Tenda WiFi App, and choose Settings > Advanced > Working Mode.
Step 1
Tap Switch Mode.
Step 2
Tap Confirm in the pop-up window.
Step 3
Use an Ethernet cable to connect the LAN port of your Mesh device to a LAN port of your
Step 4
upstream router (the router has connected to the internet).
---End
181
Document version: V1.0