Online upgrade
To perform online upgrade on a single node:
Log in to the web
Step 1
Choose More > System Settings > Firmware Upgrade.
Step 2
Click Online Upgrade in the line of the node to be upgraded.
Step 3
Wait until the upgrade completes. Then, access the Firmware Upgrade page again and
check whether the upgrade is successful based on Current Firmware Version
---End
For better performance of the new firmware of the Mesh device, you are recommended to reset the
Mesh device to factory settings and re-configure the Mesh device after the upgrade completes.
Local upgrade
To prevent the Mesh device from being damaged:
−
Ensure that the firmware is applicable to the Mesh device.
−
It is recommended to upgrade the firmware by connecting a LAN port to a computer and
performing the upgrade on the web UI.
−
When you are upgrading the firmware, do not power off the Mesh device.
Go to www.tendacn.com. Download applicable firmware of the Mesh device to your local
Step 1
computer and unzip it.
Log in to the web
Step 2
Choose More > System Settings > Firmware Upgrade.
Step 3
Click Local Upgrade in the line of the node to be upgraded.
Step 4
Click Select File.
Step 5
UI.
UI.
124
Document version: V1.0
.