Tenda MX15 Pro User Manual page 72

---End
AP mode
When you have a smart home gateway that only provides wired internet access, you can set the
Mesh device to work in AP mode to provide wireless coverage.
When the Mesh device is set to AP mode:
−
Every physical port can be used as a LAN port.
−
The LAN IP address of the Mesh device will be changed. Please log in to the web UI of the Mesh
device by visiting tendawifi.com.
−
Functions, such as bandwidth control and port mapping will be unavailable. Refer to the web UI
for available functions.
To switch the working mode to AP mode:
If you have finished the quick setup wizard before, start a web browser and visit tendawifi.com on a
connected client, then start from
Log in to the web
Step 1
Choose More > Working Mode.
Step 2
Click Switch Mode.
Step 3
Step 3.
UI.
62
Document version: V1.0