Tenda MX15 Pro User Manual page 116

Enter the IP address of the host, which is 192.168.0.136 in this example.
3.
Click Save.
4.
Assign a fixed IP address to the host where the server locates.
Step 3
Choose More > Network Settings > LAN Settings.
1.
Click Add.
2.
Set Device Name for the server host, which is FTP server in this example.
3.
Enter the MAC Address of the host of the server, which is D4:61:DA:1B:CD:89 in
4.
this example.
Enter the reserved IP Address for the server host, which is 192.168.0.136 in this
5.
example.
Click OK.
6.
The client is displayed under Static IP Reservation List.
----End
When the configuration is complete, users from the internet can access the DMZ host by visiting
"Intranet service application layer protocol name://WAN IP address of the Mesh device". If the
intranet service port number is not the default number, the visiting address should be: "Intranet
service application layer protocol name://WAN IP address of the Mesh device:Intranet service port
number".
106
Document version: V1.0