Tenda MX15 Pro User Manual page 89

Parameter description
Parameter Description
Specifies various protocols used for wireless transmission.
The network modes vary with models. Refer to the product you purchased.
2.4 GHz Wi-Fi network supports the following modes:
Network Mode
5 GHz WiFi network supports the following modes:
Specifies the channel in which the Wi-Fi network works.
By default, the wireless channel is Auto, which indicates that the Mesh device selects a
Channel
channel for the Wi-Fi network automatically. You are recommended to choose a channel
with less interference for better wireless transmission efficiency. You can use a third-party
tool to scan the Wi-Fi signals nearby to understand the channel usage situations.
−
802.11b/g/n: Indicates that devices compliant with the IEEE 802.11b or IEEE
802.11g protocol, and devices working at 2.4 GHz and compliant with the IEEE
802.11n can connect to the 2.4 GHz WiFi network of the Mesh device.
−
802.11b/g/n/ac: Indicates that devices compliant with the IEEE 802.11b or IEEE
802.11g protocol, and devices working at 2.4 GHz and compliant with the IEEE
802.11n or IEEE 802.11 ac protocol can connect to the 2.4 GHz WiFi network of
the Mesh device.
−
802.11b/g/n/ax: Indicates that devices compliant with the IEEE 802.11b or IEEE
802.11g protocol, and devices working at 2.4 GHz and compliant with the IEEE
802.11n or IEEE 802.11ax protocol can connect to the 2.4 GHz Wi-Fi network of
the Mesh device.
−
802.11b/g/n/ac/ax: Indicates that devices compliant with the IEEE 802.11b or
IEEE 802.11g protocol, and devices working at 2.4 GHz and compliant with the
IEEE 802.11n, IEEE 802.11ac or IEEE 802.11ax protocol can connect to the 2.4
GHz WiFi network of the Mesh device.
−
802.11a/n: Indicates that devices compliant with the IEEE 802.11a protocol, and
devices working at 5 GHz and compliant with the IEEE 802.11n can connect to
the Mesh device.
−
802.11a/n/ac: Indicates that devices compliant with the IEEE 802.11a or IEEE
802.11ac protocol, and devices working at 5 GHz and compliant with the IEEE
802.11n can connect to the Mesh device.
−
802.11a/n/ac/ax: Indicates that devices compliant with the IEEE 802.11a or IEEE
802.11ac protocol, and devices working at 5 GHz and compliant with the IEEE
802.11n or IEEE 802.11ax protocol can connect to the Mesh device.
79
Document version: V1.0