The following table describes the information and operation shortcuts displayed under Node Info.
No.
Description
This area displays the information and operation shortcuts of the primary node, including:
−
Node Name: Indicates the name of primary node, which is Controller by default. You can
change the name by clicking
−
IP Address: Indicates the IP address of the LAN port of the primary node.
−
MAC Address: Indicates the MAC address of the LAN port of the primary node.
−
Uptime: Indicates the network connection time of the primary node.
−
Ethernet Port Status: Indicates the status of the Ethernet ports of the primary node.
Currently, this parameter is only available for Mesh15XP, MX15 Pro, EX15 Pro,
Mesh21XEP, MX21 Pro and EX21 Pro.
1
−
Connection Quality: Shows the connection signal strength with the primary node. You
can hover your mouse over
available for some models. Refer to the product that you purchased.
−
LED On/Off: Provides a
primary node. You can use this function to check which device you are operating.
on/off all indicators
−
Operation: Provides a
for resetting the primary node.
Resetting clears all configurations and restores the device to factory settings. Please operate with
caution.
: Indicates that the port is connected and used as a WAN port.
: Indicates that the port is connected and used as a LAN port.
: Indicates that the port is connected and used as an IPTV port.
: Indicates that the port is not connected.
prevails to this operation.
beside Primary Node.
to see the strength value. This parameter is only
button for turning on/off the LED indicator of the
button for rebooting the primary node and a
23
Document version: V1.0
Turn
button