Parameter description
Parameter
PPPoE Username
PPPoE Password
The following message is displayed, indicating that the settings are saved successfully.
---End
Verification:
You can ping an IPv6 website (240c::6666 for example) to check whether the Mesh device accesses
the IPv6 network successfully. The following steps are for your reference.
On a computer connected to the Mesh device, press Windows + R to open the Run dialog
Step 1
box.
Type cmd and then click OK to open a regular Command Prompt.
Step 2
Enter ping 240c::6666 and press Enter.
Step 3
---End
As shown in the following figure, if the number of packets received is not 0, the Mesh device
accesses the IPv6 network successfully.
Description
Specify the PPPoE user name and password provided by your ISP.
IPv4 and IPv6 services share the same PPPoE account.
68
Document version: V1.0